When tested with an XRF instrument, this newer (specific year of purchase/manufacture is unknown – sorry!) red vinyl-coated (“rubberized”) garage / bike storage hook pictured here had the following readings:
Testing was done on the red vinyl coated component of the hook.
- Barium (Ba): 398 +/- 42 ppm
- Zinc (Zn): 482 +/- 31 ppm
- Iron (Fe): 74 +/- 46 ppm
All metals detected are listed above.
If a metal was not detected by the XRF, it was not listed.
As with all tests on this blog, readings were done for a minimum of 60 seconds (in Consumer Goods mode) unless otherwise noted.
Results are science-based and replicable.
Takeaway / My Advice:
If you need hooks like this, please consider only buying newer hooks (which are likely to have lower Lead levels, or even be negative for Lead – like this one is) vs. re-using second-hand older hooks which can have very high Lead levels (see example here). I specifically would not get these at a yard sale or similar.
As always, please let me know if you have any questions.
Thank you for reading and for sharing my posts!
Your shares of my posts help me to continue reporting these results in a forum that is free and available to the public (not behind a paywall.)
Tamara Rubin
#LeadSafeMama
Leave a Reply